Toshiba Marine Radio C70 B User Manual

User's Manual  
Satellite C70-B/L70-B/S70-B  
Satellite Pro C70-B  
Series  
 
User's Manual  
iii  
 
Chapter 1  
TOSHIBA Legal, Regulatory and  
Safety  
This chapter states the Legal, regulatory and safety information applicable  
to TOSHIBA computers.  
Copyright, Disclaimer and Trademarks  
Copyright  
© 2014 by TOSHIBA Corporation. All rights reserved. Under the copyright  
laws, this manual cannot be reproduced in any form without the prior  
written permission of TOSHIBA. No patent liability is assumed, with respect  
to the use of the information contained herein.  
First edition March 2014  
Copyright authority for music, movies, computer programs, databases and  
other intellectual property covered by copyright laws belongs to the author  
or to the copyright owner. Copyrighted material can be reproduced only for  
personal use or use within the home. Any other use beyond that stipulated  
above (including conversion to digital format, alteration, transfer of copied  
material and distribution on a network) without the permission of the  
copyright owner is a violation of copyright or author's rights and is subject  
to civil damages or criminal action. Please comply with copyright laws in  
making any reproduction from this manual.  
Disclaimer  
This manual has been validated and reviewed for accuracy. The  
instructions and descriptions it contains are accurate for your computer at  
the time of this manual’s production. However, succeeding computers and  
manuals are subject to change without notice. TOSHIBA assumes no  
liability for damages incurred directly or indirectly from errors, omissions or  
discrepancies between the computer and the manual.  
Trademarks  
Intel, Intel SpeedStep, Intel Core and Centrino are trademarks or registered  
trademarks of Intel Corporation.  
AMD, the AMD Arrow logo, PowerPlay, Vari-Bright and combinations  
thereof are trademarks of Advanced Micro Devices, Inc.  
User's Manual  
 
1-1  
   
Windows, Microsoft and Windows logo are registered trademarks of  
Microsoft Corporation.  
The Bluetooth® word mark and logos are registered trademarks owned by  
Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and  
its affiliates is under license.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and the  
HDMI Logo are trademarks or registered trademarks of HDMI Licensing  
LLC in the United States and other countries.  
Secure Digital and SD are trademarks of SD Card Association.  
MultiMediaCard and MMC are trademarks of MultiMediaCard Association.  
Blu-ray Disc™, Blu-ray™, BDXL™ and the logos are trademarks of the  
Blu-ray Disc Association.  
ATHEROS is a trademark of Qualcomm Atheros, Inc., registered in the  
United States and other countries.  
DTS, the Symbol, & DTS and the Symbol together are registered  
trademarks and DTS Studio Sound is a trademark of DTS, Inc. © DTS, Inc.  
All Rights Reserved.  
Realtek is a registered trademark of Realtek Semiconductor Corporation.  
All other product names and service names in this manual may be  
trademarks or registered trademarks of their respective companies.  
Regulatory Information  
FCC information  
FCC notice "Declaration of Conformity Information"  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
User's Manual  
 
1-2  
 
Only peripherals complying with the FCC class B limits may be attached to  
this equipment. Operation with non-compliant peripherals or peripherals not  
recommended by TOSHIBA is likely to result in interference to radio and  
TV reception. Shielded cables must be used between the external devices  
and the computer’s External RGB monitor port, Universal Serial Bus (USB  
2.0 and 3.0) ports, HDMI port and Headphone/Microphone combo jack.  
Changes or modifications made to this equipment, not expressly approved  
by TOSHIBA or parties authorized by TOSHIBA could void the user’s  
authority to operate the equipment.  
FCC conditions  
This device complies with part 15 of the FCC Rules. Operation is subject to  
the following two conditions:  
1. This device may not cause harmful interference.  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
Contact  
Address:  
TOSHIBA America Information Systems, Inc.  
9740 Irvine Boulevard  
Irvine, California 92618-1697  
Telephone: (949) 583-3000  
This information is only applicable for the countries/regions where it is  
required.  
EU Declaration of Conformity  
This product is carrying the CE-Mark in  
accordance with the related European Directives.  
Responsible for CE-Marking is TOSHIBA EUROPE  
GMBH, Hammfelddamm 8, 41460 Neuss,  
Germany. The complete and official EU  
Declaration of Conformity can be found on  
TOSHIBA’s web site  
http://epps.toshiba-teg.com on the Internet.  
CE compliance  
This product is labeled with the CE Mark in accordance with the applicable  
European Directives, notably RoHS Directive 2011/65/EU, Radio  
User's Manual  
 
1-3  
Equipment and Telecommunications Terminal Directive 1999/5/EC,  
Ecodesign Directive 2009/125/EC (ErP) and the related implementing  
measures.  
This product and the original options are designed to observe the related  
EMC (Electromagnetic Compatibility) and safety standards. However,  
TOSHIBA cannot guarantee that this product still observes these EMC  
standards if options or cables not produced by TOSHIBA are connected or  
implemented. In this case the persons who have connected/implemented  
those options/cables have to provide assurance that the system (PC plus  
options/cables) still fulfils the required standards. To avoid general EMC  
problems, the following guidance should be noted:  
Only CE marked options should be connected/implemented  
Only best shielded cables should be connected  
Working environment  
This product was designed to fulfil the EMC (Electromagnetic Compatibility)  
requirements to be observed for so-called “Residential, commercial and  
light industry environments”. TOSHIBA do not approve the use of this  
product in working environments other than the above mentioned  
“Residential, commercial and light industry environments”.  
For example, the following environments are not approved:  
Industrial Environments (e.g. environments where a mains voltage of  
380 V three-phase is used)  
Medical Environments  
Automotive Environments  
Aircraft Environments  
Any consequences resulting from the use of this product in working  
environments that are not approved are not the responsibility of TOSHIBA.  
The consequences of the use of this product in non-approved working  
environments may be:  
Interference with other devices or machines in the near surrounding  
area.  
Malfunction of, or data loss from, this product caused by disturbances  
generated by other devices or machines in the near surrounding area.  
Therefore TOSHIBA strongly recommend that the electromagnetic  
compatibility of this product should be suitably tested in all non-approved  
working environments before use. In the case of automobiles or aircraft,  
the manufacturer or airline respectively should be asked for permission  
before use of this product.  
Furthermore, for general safety reasons, the use of this product in  
environments with explosive atmospheres is not permitted.  
User's Manual  
 
1-4  
VCCI Class B Information (Japan Only)  
この装置は、クラスB情報技術装置です。この装置は、家庭環境で使  
用することを目的としていますが、この装置がラジオやテレビジョン  
受信機に近接して使用されると、受信障害を引き起こすことがあります。  
取扱説明書に従って正しい取り扱いをしてください。  
VCCI-B  
Canadian regulatory information (Canada only)  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulation of the Canadian Department of Communications.  
Note that Canadian Department of Communications (DOC) regulations  
provide, that changes or modifications not expressly approved by  
TOSHIBA Corporation could void your authority to operate this equipment.  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
Cet appareil numérique de la class B respecte toutes les exgences du  
Règlement sur le matériel brouileur du Canada.  
Following information is only valid for EU-member  
States:  
Disposal of products  
The crossed out wheeled dust bin symbol indicates that  
products must be collected and disposed of separately  
from household waste. Integrated batteries and  
accumulators can be disposed of with the product. They  
will be separated at the recycling centres.  
The black bar indicates that the product was placed on the  
market after August 13, 2005.  
By participating in separate collection of products and  
batteries, you will help to assure the proper disposal of  
products and batteries and thus help to prevent potential  
negative consequences for the environment and human  
health.  
For more detailed information about the collection and  
recycling programmes available in your country, please  
visit our website  
( www.toshiba.eu/recycling ) or contact your local city  
office or the shop where you purchased the product.  
User's Manual  
 
1-5  
Disposal of batteries and/or accumulators  
The crossed out wheeled dust bin symbol indicates that  
batteries and/or accumulators must be collected and  
disposed of separately from household waste.  
If the battery or accumulator contains more than the  
specified values of lead (Pb), mercury (Hg), and/or  
cadmium (Cd) defined in the European Battery Directive,  
then the chemical symbols for lead (Pb), mercury (Hg)  
and/or cadmium (Cd) will appear below the crossed out  
wheeled dust bin symbol.  
By participating in separate collection of batteries, you will  
help to assure the proper disposal of products and  
batteries and thus help to prevent potential negative  
consequences for the environment and human health.  
For more detailed information about the collection and  
recycling programmes available in your country, please  
visit our website  
( www.toshiba.eu/recycling ) or contact your local city  
office or the shop where you purchased the product.  
These symbols may not stick depending on the country and region where  
you purchased.  
REACH - Compliance Statement  
The European Union (EU) chemical regulation, REACH (Registration,  
Evaluation, Authorization and Restriction of Chemicals), entered into force  
on 1 June 2007, with phased deadlines to 2018.  
Toshiba will meet all REACH requirements and is committed to provide our  
customers with information about the presence in our articles of  
substances included on the candidate list according to REACH regulation.  
Please consult the following website  
www.toshiba.eu/reach for information about the presence in our articles of  
substances included on the candidate list according to REACH in a  
concentration above 0.1% weight by weight.  
Following information is only for Turkey:  
Disposal of products:  
User's Manual  
 
1-6  
The crossed wheelie bin symbol means that this product  
should not be collected and disposed with other  
household wastes. When product become waste at the  
end- of-life, to protect environment and human health, it  
should be given to nearest collection recycling or  
disposal center. For more information about collection  
and recycling programs in your country please contact  
your local authority or the retailer where the product was  
purchased.  
Compliant with AEEE Directive.  
The number of possible pixel failures of your display is defined  
according to ISO 9241-307 standards. If the number of pixel failures is  
less than this standard, they will not be counted as defect or failure.  
Battery is a consumption product, since the battery time depends on  
the usage of your computer. If the battery can not be charged at all,  
then it is a defect or failure. The changes in battery time is not a defect  
or failure.  
Following information is only for India:  
The use of this symbol indicates that this product may not  
be treated as household waste.  
By ensuring this product is disposed of correctly, you will  
help prevent potential negative consequences for the  
environment and human health, which could otherwise be  
caused by inappropriate waste handling of this product.  
For more detailed information about recycling of this  
product, please visit our website  
( http://www.toshiba-india.com ) or contact call center  
(1800-200-8674).  
These symbols may not stick depending on the country and region where  
you purchased.  
Video Standard Notice  
THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND  
MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL  
AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING  
VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO")  
AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS  
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND  
NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A  
VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH  
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY  
User's Manual  
 
1-7  
 
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT  
RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES  
AND LICENSING MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE  
HTTP://WWW.MPEGLA.COM.  
OpenSSL Toolkit License Issues  
LICENSE ISSUES  
==============  
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of  
the OpenSSL License and the original SSLeay license apply to the toolkit.  
See below for the actual license texts. Actually both licenses are BSD-style  
Open Source licenses. In case of any license issues related to OpenSSL  
please contact [email protected].  
OpenSSL License  
------------------------  
/*=====================================================  
Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice,  
this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright  
notice, this list of conditions and the following disclaimer in the  
documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software  
must display the following acknowledgment:  
"This product includes software developed by the OpenSSL Project for  
use in the OpenSSL Toolkit. "  
( http://www.openssl.org/ )  
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be  
used to endorse or promote products derived from this software  
without prior written permission. For written permission, please contact  
5. Products derived from this software may not be called "OpenSSL" nor  
may "OpenSSL" appear in their names without prior written permission  
of the OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following  
acknowledgment:  
"This product includes software developed by the OpenSSL Project for  
use in the OpenSSL Toolkit"  
( http://www.openssl.org/ )  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS''  
AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT  
User's Manual  
 
1-8  
 
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN  
NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS  
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR  
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY  
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
=====================================================  
This product includes cryptographic software written by Eric Young  
([email protected]). This product includes software written by Tim  
Hudson ([email protected]).  
*/  
Original SSLeay License  
----------------------------------  
/* Copyright (C) 1995-1998 Eric Young ([email protected])  
All rights reserved.  
This package is an SSL implementation written by Eric Young  
The implementation was written so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the  
following conditions are aheared to. The following conditions apply to all  
code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code;  
not just the SSL code. The SSL documentation included with this  
distribution is covered by the same copyright terms except that the holder  
is Tim Hudson ([email protected]).  
Copyright remains Eric Young's, and as such any Copyright notices in the  
code are not to be removed.  
If this package is used in a product, Eric Young should be given attribution  
as the author of the parts of the library used.  
This can be in the form of a textual message at program startup or in  
documentation (online or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list  
of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright  
notice, this list of conditions and the following disclaimer in the  
documentation and/or other materials provided with the distribution.  
User's Manual  
 
1-9  
3. All advertising materials mentioning features or use of this software  
must display the following acknowledgement:  
"This product includes cryptographic software written by Eric Young  
The word 'cryptographic' can be left out if the rouines from the library  
being used are not cryptographic related :-).  
4. If you include any Windows specific code (or a derivative thereof) from  
the apps directory (application code) you must include an  
acknowledgement:  
"This product includes software written by Tim Hudson  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY  
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED  
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO  
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR  
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF  
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
The licence and distribution terms for any publically available version or  
derivative of this code cannot be changed. i.e. this code cannot simply be  
copied and put under another distribution licence [including the GNU Public  
Licence.]  
*/  
FreeType License Issues  
The FreeType Project LICENSE  
----------------------------  
2006-Jan-27  
Copyright 1996-2002, 2006 by  
David Turner, Robert Wilhelm, and Werner Lemberg  
Introduction  
============  
The FreeType Project is distributed in several archive packages; some of  
them may contain, in addition to the FreeType font engine, various tools  
and contributions which rely on, or relate to, the FreeType Project.  
User's Manual  
 
1-10  
 
This license applies to all files found in such packages, and which do not  
fall under their own explicit license. The license affects thus the FreeType  
font engine, the test programs, documentation and makefiles, at the very  
least.  
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG  
Group) licenses, which all encourage inclusion and use of free software in  
commercial and freeware products alike. As a consequence, its main  
points are that:  
We don't promise that this software works. However, we will be  
interested in any kind of bug reports. (`as is' distribution)  
You can use this software for whatever you want, in parts or full form,  
without having to pay us. (`royalty-free' usage)  
You may not pretend that you wrote this software. If you use it, or only  
parts of it, in a program, you must acknowledge somewhere in your  
documentation that you have used the FreeType code. (`credits')  
We specifically permit and encourage the inclusion of this software, with or  
without modifications, in commercial products.  
We disclaim all warranties covering The FreeType Project and assume no  
liability related to The FreeType Project.  
Finally, many people asked us for a preferred form for a credit/disclaimer to  
use in compliance with this license. We thus encourage you to use the  
following text:  
"""  
Portions of this software are copyright (C) <year> The FreeType Project  
( www.freetype.org ). All rights reserved.  
"""  
Please replace <year> with the value from the FreeType version you  
actually use.  
Legal Terms  
============  
0. Definitions  
--------------  
Throughout this license, the terms `package', `FreeType Project', and  
`FreeType archive' refer to the set of files originally distributed by the  
authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the  
`FreeType Project', be they named as alpha, beta or final release.  
`You' refers to the licensee, or person using the project, where `using' is a  
generic term including compiling the project's source code as well as  
linking it to form a `program' or `executable'. This program is referred to as  
`a program using the FreeType engine'.  
This license applies to all files distributed in the original FreeType Project,  
including all source code, binaries and documentation, unless otherwise  
stated in the file in its original, unmodified form as distributed in the original  
User's Manual  
 
1-11  
archive. If you are unsure whether or not a particular file is covered by this  
license, you must contact us to verify this.  
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert  
Wilhelm, and Werner Lemberg. All rights reserved except as specified  
below.  
1. No Warranty  
--------------  
THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN  
NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE  
INABILITY TO USE, OF THE FREETYPE PROJECT.  
2. Redistribution  
--------------  
This license grants a worldwide, royalty-free, perpetual and irrevocable  
right and license to use, execute, perform, compile, display, copy, create  
derivative works of, distribute and sublicense the FreeType Project (in both  
source and object code forms) and derivative works thereof for any  
purpose; and to authorize others to exercise some or all of the rights  
granted herein, subject to the following conditions:  
Redistribution of source code must retain this license file (`FTL.TXT')  
unaltered; any additions, deletions or changes to the original files must  
be clearly indicated in accompanying documentation. The copyright  
notices of the unaltered, original files must be preserved in all copies  
of source files.  
Redistribution in binary form must provide a disclaimer that states that  
the software is based in part of the work of the FreeType Team, in the  
distribution documentation. We also encourage you to put an URL to  
the FreeType web page in your documentation, though this isn't  
mandatory.  
These conditions apply to any software derived from or based on the  
FreeType Project, not just the unmodified files. If you use our work, you  
must acknowledge us. However, no fee need be paid to us.  
3. Advertising  
--------------  
Neither the FreeType authors and contributors nor you shall use the name  
of the other for commercial, advertising, or promotional purposes without  
specific prior written permission.  
We suggest, but do not require, that you use one or more of the following  
phrases to refer to this software in your documentation or advertising  
materials: `FreeType Project', `FreeType Engine', `FreeType library', or  
`FreeType Distribution'.  
User's Manual  
 
1-12  
As you have not signed this license, you are not required to accept it.  
However, as the FreeType Project is copyrighted material, only this license,  
or another one contracted with the authors, grants you the right to use,  
distribute, and modify it. Therefore, by using, distributing, or modifying the  
FreeType Project, you indicate that you understand and accept all the  
terms of this license.  
4. Contacts  
--------------  
There are two mailing lists related to FreeType:  
Discusses general use and applications of FreeType, as well as future  
and wanted additions to the library and distribution. If you are looking  
for support, start in this list if you haven't found anything to help you in  
the documentation.  
Discusses bugs, as well as engine internals, design issues, specific  
licenses, porting, etc.  
Our home page can be found at  
http://www.freetype.org  
User's Manual  
 
1-13  
ENERGY STAR® Program  
Your Computer model may be ENERGY STAR®  
compliant. If the model you purchased is compliant, it is  
labeled with the ENERGY STAR logo on the computer and  
the following information applies.  
TOSHIBA is a partner in the ENERGY STAR Program and  
has designed this computer to meet the latest ENERGY  
STAR guidelines for energy efficiency. Your computer  
ships with the power management options preset to a  
configuration that will provide the most stable operating  
environment and optimum system performance for both  
AC power and battery modes.  
To conserve energy, your computer is set to enter the low-  
power Sleep Mode which shuts down the system and  
display within 15 minutes of inactivity in AC power mode.  
TOSHIBA recommends that you leave this and other  
energy saving features active, so that your computer will  
operate at its maximum energy efficiency. You can wake  
the computer from Sleep Mode by pressing the power  
button.  
Your ENERGY STAR certified computer should be set by  
default to enter a low-power "sleep mode" after a period of  
inactivity. Simply touching the mouse or keyboard "wakes"  
the computer in seconds. These sleep features can save  
you up to $23 per year (200 kWh per year in electricity)  
and prevent up to 300 pounds of greenhouse gas  
emissions annually.To learn how to adjust or activate  
these sleep settings on your computer, please go to:  
www.energystar.gov/sleepinstructions  
To activate sleep settings organization-wide quickly and  
easily through network tools, please go to  
www.energystar.gov/powermanagement  
Disposing of the computer and the computer's  
batteries  
Discard this computer in accordance with applicable laws and  
regulations. For further information, contact your local government.  
This computer contains rechargeable batteries. After repeated use,  
the batteries will finally lose their ability to hold a charge and you will  
need to replace them. Under certain applicable laws and regulation, it  
may be illegal to dispose of old batteries by placing them in the trash.  
User's Manual  
 
1-14  
   
Please be kind to our shared environment. Check with your local  
government authority for details regarding where to recycle old  
batteries or how to dispose of them properly.  
Optical disc drive safety instructions  
Be sure to check the precautions at the end of this section.  
The drive model employs a laser system. To ensure proper use of this  
product, please read this instruction manual carefully and retain for  
future reference. Should the unit ever require maintenance, contact an  
authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
Location of the Required Label  
(Sample shown below. Location of the label and manufacturing information  
may vary.)  
TOSHIBA SAMSUNG STORAGE  
TECHNOLOGY KOREA  
CORPORATION 14F, Bldg. No.102,  
Digital empire2, 486 Sin-dong,  
Yeongtong-gu, Suwon-si,  
Gyeonggi-do, Korea, 443-734  
Precautions  
CAUTION: This appliance contains  
a laser system and is classified as a  
“CLASS 1 LASER PRODUCT.” To  
use this model properly, read the  
instruction manual carefully and  
keep this manual for your future  
reference. In case of any trouble  
with this model, please contact your  
nearest “AUTHORIZED service  
station.” To prevent direct exposure  
to the laser beam, do not try to  
open the enclosure.  
User's Manual  
 
1-15  
 
General Precautions  
TOSHIBA computers are designed to optimize safety, minimize strain and  
withstand the rigors of portability. However, certain precautions should be  
observed to further reduce the risk of personal injury or damage to the  
computer.  
Be certain to read the general precautions below and to note the cautions  
included in the text of the manual.  
Provide adequate ventilation  
Always make sure your computer and AC adaptor have adequate  
ventilation and are protected from overheating when the power is turned on  
or when an AC adaptor is connected to a power outlet (even if your  
computer is in Sleep Mode). In this condition, observe the following:  
Never cover your computer or AC adaptor with any object.  
Never place your computer or AC adaptor near a heat source, such as  
an electric blanket or heater.  
Never cover or block the air vents including those located at the base  
of the computer.  
Always operate your computer on a hard flat surface. Using your  
computer on a carpet or other soft material can block the vents.  
Always provide sufficient space around the computer.  
Overheating your computer or AC adaptor could cause system failure,  
computer or AC adaptor damage or a fire, possibly resulting in serious  
injury.  
Creating a computer-friendly environment  
Place the computer on a flat surface that is large enough for the computer  
and any other items you are using, such as a printer.  
Leave enough space around the computer and other equipment to provide  
adequate ventilation. Otherwise, they may overheat.  
To keep your computer in prime operating condition, protect your work area  
from:  
Dust, moisture, and direct sunlight.  
Equipment that generates a strong electromagnetic field, such as  
stereo speakers (other than speakers that are connected to the  
computer) or speakerphones.  
Rapid changes in temperature or humidity and sources of temperature  
change such as air conditioner vents or heaters.  
Extreme heat, cold, or humidity.  
Liquids and corrosive chemicals.  
User's Manual